STEP ONE: To apply your wall art, we suggest you take a minute or two to prepare where you are going to put it. Make sure the surface is clean and dust free, then tape up your art with masking tape before you take the backing off. Remember, if its a single colour wall sticker, it is NOT reusable and will come of easily, but will probably not go back! |
STEP TWO: Peel off the backing paper, making sure the all the wall art is stuck to the application tape. If the graphic is stuck to the backing paper, smooth it back onto the application tape until it sticks and re-try. |
|
STEP THREE: Rub firmly over the wall art at a 45 degree angle. This will make sure you don’t get any air bubbles. Some walls if greasy, newly painted, or someway difficult to adhere too. Try a small section first! | STEP FOUR: Wait 20 minutes then peel back the application tape by pulling slowly away from the wall art at 180 degrees. Make sure there is no vinyl stuck to the application tape, re-rub with the applicator gently if needed. | |
Choose a currency below to display product prices in the selected currency.